Features:

Open-source SIK firmware
Plug-n-play for Pixhawk Standard Flight Controllers
The easiest way to connect your Autopilot and Ground Station
Interchangeable air and ground radio
Micro-USB port (Type-C Adapter Cable Included)
6-position JST-GH connector
100 mW maximum output power (adjustable) -117 dBm receive sensitivity
RP-SMA connector
2-way full-duplex communication through adaptive TDM UART interface
Transparent serial link
MAVLink protocol framing
Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
Error correction corrects up to 25% of bit errors Open-source SIK firmware
Configurable through Mission Planner & APM Planner
FT230X FT231 is a USB to BASIC UART IC
FCC IDENTIFIER: 2AP22-HT03-V3

Package Include:

2 × Radio modules with antennas
1× Micro-USB to USB-A cable
1×Micro-USB to Micro-USB OTG adapter cable
1× Micro USB to Type C Adapter
1× JST-GH-6P to JST-GH-6P cable (for Pixhawk Standard FC)
1 × JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

Specification:-

Brand		Holybro
Model		SiK Telemetry Radio V3
Max Power Output (W)		100 mW
Receiving Sensitivity		117 dBm
Antenna Connector		RP-SMA
Interface		TDM UART
Current(mA)		Receive current: 25 mA, Transmit current: 100 mA at 20dBm
Length (mm):		53
Width (mm):		28
Height (mm):		10.7
Shipping Weight		0.128 kg
Shipping Dimensions		13 × 11 × 4 cm

Title	Default Title