Description

Holybro Micro M10 GPS With Case uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou can be received concurrently. It also comes with the IST8310 compass.

The high-gain 25 x 25 mm2 patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, a rechargeable backup battery for warm starts.

Firmware Support for M10 GPS: PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.

Features:

The newest Ublox 10th Gen GNSS
Fast & Accurate Positioning
IST8310 Compass
Small Form Factor

Package Include:

1× Micro GPS module *1
1× JST GH 6 Position Connector 15 cm
1× JST-GH 6pin Colored Silicon Cable 15 cm

Specification:-

GNSS Receiver		Ublox M10
Number of Concurrent GNSS		Up to 4 GNSS
		– BeiDou
		– Galileo
		– GLONASS
		– GPS
		– QZSS
Frequency Band		– GPS L1
		– Galileo E1
		– GLONASS L1
		– BeiDou B1
		– SBAS L1
		– QZSS L1
Compass		IST8310
Output Protocol		– UBX (U-blox)
		– NMEA
Accuracy		2.0m CEP
Nav. Update Rate		Up to 25 Hz (single GNSS),
		Up to 10 Hz (4 concurrent GNSS)
GNSS Augmentation System		EGNOS, GAGAN, MSAS and WAAS
		QZSS: L1S
Default Baud Rate		115200
Input Voltage		4.7-5.2V
Port Type		JST-GH-6P
Antenna		25 x 25 x 4 mm ceramic patch antenna
Power consumption		Less than 200mA @ 5V
Operating Temperature		-40~80C
Dimension		– 32 x 26 x 9mm (w o Case)
		– 34 x 28 x 11mm (With Case)
Weight		– 14g (w o Case)
		– 16g (With Case)
Shipping Weight		0.031 kg
Shipping Dimensions		12 × 9 × 2 cm

Title	Default Title