Description

PM03D provides regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible with a flight controller that uses an I2C power monitor such as the Pixhawk 5X and up.

It is designed for multi-rotors like the X500 V2. It has both XT-30 & XT-60 connectors preinstalled for motor ESCs and Battery, as well as two 5V BEC and a selectable 8V 12V output for different kinds of peripheral devices.

The full setup guide can be found here.
This PM uses I2C digital signal data output, Compatible with Pixhawk 5X 6X Series.
NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.
Power Module Comparison Table

Features:

Plug & play, no additional setup required for QGroundcontrol & Mission Planner
XT-30 connectors and solder pads for easy motor ESC connection
Onboard voltage regulators: two 5.2V & one selectable 8V 12V
5V A ports for powering companion computers or peripheral devices
Selectable 8V or 12V triple row pin header for powering peripheral device.

Package Includes:

1× PM06 board
1× 80mm XT60 connector wire (pre-soldered)
1× Electrolytic capacitor: 220uF 63V (pre-soldered)
1×2.0mm pitch CLIK-Mate 6pin cable (To power flight controller)
1× 4pin JST GH to USB Type C
1× 4pin JST GH to barrel plug (2.1*5.5mm)
1× 4pin JST GH to barrel plug (2.5*5.5mm)
1× 4pin Pin Dupont Cable (2pc)1× Nylon standoffs & nuts

Specification:-

Item Type:		Module
Input Voltage (V)		6S battery
Rated Current (A)		60
Max Current (A)		120A (<60 sec)
Mounting Hole (mm)		45×45
Shipping Weight		0.0 kg

Title	Default Title