SpeedyBee F745 35A BLS 25.5×25.5 AIO Flight Controller. on Sale

Description
The SpeedyBee F745 35A BLS 25.5×25.5 AIO Flight Controller is designed to provide a compact and integrated solution for small drones, where space is limited, and minimizing weight is crucial. This all-in-one flight controller aims to deliver high performance and convenience in a tiny package.
The SpeedyBee F745 AIO includes an F745 flight controller and a 35A ESC. Featuring a BMP280 barometer, OSD, 8MB Memory Blackbox, and MPU600 Gyro… this AIO board is the perfect addition to your FPV build.
Features:
Flight Controller:
F7 Processor:Â The flight controller typically features an F7 processor, offering advanced processing capabilities for smooth and precise flight control.
Integrated OSD (On-Screen Display):Â An integrated OSD allows you to overlay real-time telemetry data onto your FPV feed. This data can include battery voltage, flight mode, and other essential information.
Multiple UART Ports:Â The board often includes multiple UART ports for connecting peripherals like GPS modules, receivers, and telemetry devices.
Onboard BEC (Battery Eliminator Circuit):Â Some models have an onboard BEC, which provides a regulated power supply for your camera and video transmitter (VTX), reducing the need for external voltage regulators.
Betaflight or Cleanflight Support:Â The SpeedyBee F745 flight controller typically supports popular firmware options like Betaflight or Cleanflight, offering a wide range of flight features and customization options.
Blackbox Support:Â You can record flight data using the Blackbox feature for later analysis and tuning.
Electronic Speed Controllers (ESCs):
BLS (BLHeli_S) Firmware:Â The ESCs commonly feature BLHeli_S firmware, known for its reliability and performance. It supports popular communication protocols like DShot.
35A ESC Rating:Â The 35A ESC rating indicates that these speed controllers can handle a maximum current draw of 35 amps, making them suitable for micro and mini-sized drones.
Individual ESC Control:Â Each ESC is individually controlled, providing more precise motor control and diagnostics.
Telemetry Support:Â Some ESCs may offer telemetry support, allowing you to receive real-time information about the state of your motors and ESCs, including temperature and RPM.
25.5×25.5mm Form Factor: The stack is designed to fit a 25.5×25.5mm mounting pattern, which is a common size for micro and mini quadcopters.
Compact and Lightweight:Â The SpeedyBee F745 AIO Flight Controller is compact and lightweight, making it well-suited for small and lightweight drones.
More Features
- Wireless ESC firmware flashing + full BLHeli_S configuration
-
- Wireless FC firmware flashing + full Betaflight configuration
-
- Powerful and Durable 35A 6S ESC with TOSHIBA MOSFETs
-
- 4 UARTS + Barometer + I2C pads + 8MB BlackBox flash
-
- Change motor directions wirelessly
-
- DJI plug for simpler digital build
-
- Powerful F745 FC + 35A ESC
-
![]()
FLIGHT CONTROLLER
- USB Connection: Need to solder a USB TYPE-C module to D+, D-, GND pads.
-
- 5V Output: 4 groups of 5V output. The total current load is 2.5A.
-
- SmartPort: Use any TX pad of UART for the Smart Port feature.
-
- BLE Bluetooth: Supported. Used for parameter configuration
-
- UART: Full UART * 4(UART1, UART2, UART3, UART4)
-
- 3.3V Output: Supported. Up to 500mA current load.
-
- Supported Flight Controller: BetaFlight(Default)
-
- Firmware Target Name: SPEEDYBEE F745AIO
-
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
-
- BetaFlight Camera Control Pad: Yes(CC pad)
-
- Flash FC Firmware Wirelessly: Supported
-
- Download Analyze Blackbox: Supported
-
- BOOT Button: Used to enter DFU mode
-
- Current Sensor: Supported. Scale=256
-
- DJI Air Unit 6-pin Connector: Built-in.
-
- LED Pad Used for WS2812 LED
-
- ESC Telemetry UART: None
-
- RSSI Input: Not supported
-
- Flash(for Blackbox): 8MB
-
- ESC Signal Pads M1 – M4
-
- IMU(Gyro): MPU6000
-
- Barometer: BMP280
-
- MCU: STM32F745
-
- 9V Output: None
-
- OSD: Supported
-
- I2C: Supported.
-
ESC
- Current Sensor: Supported(Scale=256)
-
- ESC Protocol: DSHOT300 600
-
- Firmware: BLHeli_S JH40
-
- Continuous Current: 35A
-
- Burst Current: 45A(5S)
-
- Power Input: 3-6S LiPo
-
- Power Output: VBAT
-
Package Includes:
1× SpeedyBee F745 35A BLS 25.5×25.5 AIO Flight Controller
SPECIFICATIONS:-
Overview
Product Name
SpeedyBee F745 35A BLS AIO
Power Input
3S – 6S Lipo
Mounting
25.5 x 25.5mm, 3mm hole diameter
Dimension
36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5 or above
Weight
10.1g
FC
MCU
STM32F745
IMU(Gyro)
MPU6000
USB Connection
Need to solder a USB TYPE-C module to D+,D-,GND pads.
Barometer
BMP280
OSD
Supported
BLE Bluetooth
Supported. Used for parameter configuration
Flash FC Firmware Wirelessly
Supported
Download Analyze Blackbox
Supported
DJI Air Unit 6-pin Connector
Built-in.
Flash(for BlackBox)
8MB
Current Sensor
Supported. Scale=256
BetaFlight Camera Control Pad
Yes(CC pad)
5V Output
4 groups of 5V output. The total current load is 2.5A.
9V Output
None
ESC Signal Pads
M1 – M4
UART
Full UART * 4(UART1, UART2, UART3,UART4)
ESC Telemetry UART
None
I2C
Supported.
LED Pad
Used for WS2812 LED
Buzzer
BZ+ and BZ- pad used for 5V Buzzer
BOOT Button
Used to enter DFU mode
RSSI Input
Not supported
SmartPort
Use any TX pad of UART for the SmartPort feature.
Supported Flight Controller
BetaFlight(Default)
Firmware Target Name
SPEEDYBEE F745AIO
ESC
Power Input
3-6S LiPo
Continuous Current
35A * 4
Burst Current
45A(5seconds)
ESC Protocol
DSHOT300 600
Power Output
VBAT
Current Sensor
Supported(Sacle=256)
Firmware
BLHeli_S JH40
Additional Information
Title
Default Title
pathusstory.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
More Features
- Wireless ESC firmware flashing + full BLHeli_S configuration
-
- Wireless FC firmware flashing + full Betaflight configuration
-
- Powerful and Durable 35A 6S ESC with TOSHIBA MOSFETs
-
- 4 UARTS + Barometer + I2C pads + 8MB BlackBox flash
-
- Change motor directions wirelessly
-
- DJI plug for simpler digital build
-
- Powerful F745 FC + 35A ESC
-
![]()
FLIGHT CONTROLLER
- USB Connection: Need to solder a USB TYPE-C module to D+, D-, GND pads.
-
- 5V Output: 4 groups of 5V output. The total current load is 2.5A.
-
- SmartPort: Use any TX pad of UART for the Smart Port feature.
-
- BLE Bluetooth: Supported. Used for parameter configuration
-
- UART: Full UART * 4(UART1, UART2, UART3, UART4)
-
- 3.3V Output: Supported. Up to 500mA current load.
-
- Supported Flight Controller: BetaFlight(Default)
-
- Firmware Target Name: SPEEDYBEE F745AIO
-
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
-
- BetaFlight Camera Control Pad: Yes(CC pad)
-
- Flash FC Firmware Wirelessly: Supported
-
- Download Analyze Blackbox: Supported
-
- BOOT Button: Used to enter DFU mode
-
- Current Sensor: Supported. Scale=256
-
- DJI Air Unit 6-pin Connector: Built-in.
-
- LED Pad Used for WS2812 LED
-
- ESC Telemetry UART: None
-
- RSSI Input: Not supported
-
- Flash(for Blackbox): 8MB
-
- ESC Signal Pads M1 – M4
-
- IMU(Gyro): MPU6000
-
- Barometer: BMP280
-
- MCU: STM32F745
-
- 9V Output: None
-
- OSD: Supported
-
- I2C: Supported.
-
ESC
- Current Sensor: Supported(Scale=256)
-
- ESC Protocol: DSHOT300 600
-
- Firmware: BLHeli_S JH40
-
- Continuous Current: 35A
-
- Burst Current: 45A(5S)
-
- Power Input: 3-6S LiPo
-
- Power Output: VBAT
-
Package Includes:
1× SpeedyBee F745 35A BLS 25.5×25.5 AIO Flight Controller
SPECIFICATIONS:-
Overview
Product Name
SpeedyBee F745 35A BLS AIO
Power Input
3S – 6S Lipo
Mounting
25.5 x 25.5mm, 3mm hole diameter
Dimension
36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5 or above
Weight
10.1g
FC
MCU
STM32F745
IMU(Gyro)
MPU6000
USB Connection
Need to solder a USB TYPE-C module to D+,D-,GND pads.
Barometer
BMP280
OSD
Supported
BLE Bluetooth
Supported. Used for parameter configuration
Flash FC Firmware Wirelessly
Supported
Download Analyze Blackbox
Supported
DJI Air Unit 6-pin Connector
Built-in.
Flash(for BlackBox)
8MB
Current Sensor
Supported. Scale=256
BetaFlight Camera Control Pad
Yes(CC pad)
5V Output
4 groups of 5V output. The total current load is 2.5A.
9V Output
None
ESC Signal Pads
M1 – M4
UART
Full UART * 4(UART1, UART2, UART3,UART4)
ESC Telemetry UART
None
I2C
Supported.
LED Pad
Used for WS2812 LED
Buzzer
BZ+ and BZ- pad used for 5V Buzzer
BOOT Button
Used to enter DFU mode
RSSI Input
Not supported
SmartPort
Use any TX pad of UART for the SmartPort feature.
Supported Flight Controller
BetaFlight(Default)
Firmware Target Name
SPEEDYBEE F745AIO
ESC
Power Input
3-6S LiPo
Continuous Current
35A * 4
Burst Current
45A(5seconds)
ESC Protocol
DSHOT300 600
Power Output
VBAT
Current Sensor
Supported(Sacle=256)
Firmware
BLHeli_S JH40
Additional Information
Title
Default Title
pathusstory.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
- Wireless ESC firmware flashing + full BLHeli_S configuration
- Wireless FC firmware flashing + full Betaflight configuration
- Powerful and Durable 35A 6S ESC with TOSHIBA MOSFETs
- 4 UARTS + Barometer + I2C pads + 8MB BlackBox flash
- Change motor directions wirelessly
- DJI plug for simpler digital build
- Powerful F745 FC + 35A ESC
-
- USB Connection: Need to solder a USB TYPE-C module to D+, D-, GND pads.
- 5V Output: 4 groups of 5V output. The total current load is 2.5A.
- SmartPort: Use any TX pad of UART for the Smart Port feature.
- BLE Bluetooth: Supported. Used for parameter configuration
- UART: Full UART * 4(UART1, UART2, UART3, UART4)
- 3.3V Output: Supported. Up to 500mA current load.
- Supported Flight Controller: BetaFlight(Default)
- Firmware Target Name: SPEEDYBEE F745AIO
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
- BetaFlight Camera Control Pad: Yes(CC pad)
- Flash FC Firmware Wirelessly: Supported
- Download Analyze Blackbox: Supported
- BOOT Button: Used to enter DFU mode
- Current Sensor: Supported. Scale=256
- DJI Air Unit 6-pin Connector: Built-in.
- LED Pad Used for WS2812 LED
- ESC Telemetry UART: None
- RSSI Input: Not supported
- Flash(for Blackbox): 8MB
- ESC Signal Pads M1 – M4
- IMU(Gyro): MPU6000
- Barometer: BMP280
- MCU: STM32F745
- 9V Output: None
- OSD: Supported
- I2C: Supported.
-
- Current Sensor: Supported(Scale=256)
- ESC Protocol: DSHOT300 600
- Firmware: BLHeli_S JH40
- Continuous Current: 35A
- Burst Current: 45A(5S)
- Power Input: 3-6S LiPo
- Power Output: VBAT
-
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
Package Includes:
1× SpeedyBee F745 35A BLS 25.5×25.5 AIO Flight Controller
SPECIFICATIONS:- Overview Product Name SpeedyBee F745 35A BLS AIO Power Input 3S – 6S Lipo Mounting 25.5 x 25.5mm, 3mm hole diameter Dimension 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5 or above Weight 10.1g FC MCU STM32F745 IMU(Gyro) MPU6000 USB Connection Need to solder a USB TYPE-C module to D+,D-,GND pads. Barometer BMP280 OSD Supported BLE Bluetooth Supported. Used for parameter configuration Flash FC Firmware Wirelessly Supported Download Analyze Blackbox Supported DJI Air Unit 6-pin Connector Built-in. Flash(for BlackBox) 8MB Current Sensor Supported. Scale=256 BetaFlight Camera Control Pad Yes(CC pad) 5V Output 4 groups of 5V output. The total current load is 2.5A. 9V Output None ESC Signal Pads M1 – M4 UART Full UART * 4(UART1, UART2, UART3,UART4) ESC Telemetry UART None I2C Supported. LED Pad Used for WS2812 LED Buzzer BZ+ and BZ- pad used for 5V Buzzer BOOT Button Used to enter DFU mode RSSI Input Not supported SmartPort Use any TX pad of UART for the SmartPort feature. Supported Flight Controller BetaFlight(Default) Firmware Target Name SPEEDYBEE F745AIO ESC Power Input 3-6S LiPo Continuous Current 35A * 4 Burst Current 45A(5seconds) ESC Protocol DSHOT300 600 Power Output VBAT Current Sensor Supported(Sacle=256) Firmware BLHeli_S JH40 Additional Information
Title Default Title
pathusstory.shop © 2025 All Rights Reserved
ESC
FLIGHT CONTROLLER